Restoring the Appearance of a Marble Tiled Kitchen Floor in St Neots

St Neots is the largest town in Cambridgeshire, with a population of approximately 40,000 (Cambridge is after all a city). This is unsurprising, since the town has a long and rich history. In fact, archaeological evidence indicates that the area was home to settlements as early as the prehistoric Mesolithic period. I was recently called out to a property in the area – which itself was relatively old – to see what could be done to restore the condition and appearance of a Marble tiled kitchen floor, stylised in a small and uniform square pattern. It appeared to me that the tiles had been installed for a long time – perhaps even laid down in the original construction of the property – and, in any case, had suffered many years’ worth of neglect. The result? A very dirty and unappealing appearance and a very unhappy owner. Cleaning a Dirty Marble Tiled Kitchen Floor Before beginning the restoration of the floor, I covered up the walls and kitchen units to protect from exposure to any of the cleaning products I would be using. I then started by cleaning the floor with Tile Doctor Remove and Go, which is a multi-purpose product. Remove and Go both cleans the stone and strips away any old sealer. However, there were several areas of the floor which were affected by more deeply

Read more…

Read more

Marble Shower Tile Damaged during End of Tenancy Clean in Bedfordshire

I was contacted by the owner of a cleaning company in Milton Keynes, after an end of tenancy clean at a house in Sharnbrook went wrong. Unfortunately a member of their staff had incorrectly applied an acid based cleaning product to the Marble shower tiles which like most natural stone is acid sensitive. The cleaning product had etched the stone causing the damage you can see below. Being a reputable company they were determined to put the situation right and we were asked to step in. We have had a few issues of this type before where customers keen to remove unsightly Limescale marks from their stone tiles use a household cleaner without reading the bottle label first to see if it’s safe to use. Issues of this nature on Marble cannot be easily resolved with chemical products; it takes specialist knowledge and equipment. The quote was given and accepted and the work was booked in with the letting company for a few weeks later. Cleaning and Polishing a Marble Shower Cubicle The first photos show the extent of the damage which had not only damaged the immediate area but as the cleaning product was in liquid form it had ran down the wall had totally ruined the surface of the tiles in the lower half of the shower. The first thing I did was to protect the shower tray with towels

Read more…

Read more

Restoring Ruined Marble Wall Tiles in a Surrey Shower

Marble tiles are a fantastic choice of stone for a shower cubicle because of its distinctive characteristics and quality. It can really add a luxurious feel and when used in a bathroom take it to the next level. However, it’s extremely important to note that Marble like all natural stone is a porous and acid-sensitive material. It must therefore be cleaned with care using suitable products. This particular Marble tiled shower cubicle at a property in Leatherhead is a good example of this done wrong. The owner had used an acid-based cleaning product to clean the stone, resulting in damage to the sealer and causing unappealing streaks to form. This type of damage can appear irreparable but, with the right combination of cleaning methods and products, it can be fixed. Once the old sealer has been removed, and the tiles have been cleaned, polished and re-sealed, they can look as a good as new. Here’s how I helped this customer restore the Marble shower cubicle. Cleaning and Polishing a Marble Shower Cubicle To begin the restoration, I scrubbed the dirty grout lines using Tile Doctor Pro-Clean, which is a highly reliable and multi-purpose alkaline-based product. I then rinsed the tiles with water to remove the traces of cleaning product. Next, I moved on to the polishing stage

Read more…

Read more

Restoration of Marble Tiles

We were recently asked to look at a polished Marble Tile installed in the floor of a house in Kendal, Cumbria. They were recently fitted but the local Tiler had struggled to get the sheen right on the surface of the Marble, in fact the sealer he had used was badly smeared in some places and needed to come off. To strip off the sealer we used with a Red diamond encrusted burnishing pad fitted to a rotary machine and then rinsed the floor with water which we then removed using a wet and dry Vax machine. We then used other pads in the burnishing system process to clean and polish the Marble floor until we had a nice overall sheen. We finished off the floor with a coat of Tile Doctor Ultra-Seal, which is a premium, no-sheen, natural-look penetrating sealer formulated to provide maximum stain protection. Source: Polishing Marble Tiled Floor in Kendal, Cumrbia

Read more…

Read more

Commerical Marble Tiled Floor Restoration

Photographs below of a classic black and white Marble floor tile installation at premises in the city of Winchester. As you can see these Marble tiles had seen some traffic and were not in the best of condition following on from some building work that had been going on; fortunately we are quite used to dealing with these problem and have just the right products and equipment to restore them. Marble Tile Cleaning and Polishing For best results on hard stone surfaces such as Marble we burnish the floor using a set of diamond encrusted polishing pads. You start with a coarse pad which applied with a little water to remove surface dirt and sealers etc. before moving through a set of finer polishing pads until you reach a high shine glossy finish. Half way through the burnishing process we stopped to apply a dilution of Tile Doctor Pro-Clean along the grout lines and give them a scrub with stiff hand brushes repeating the process in stubborn areas. After the treatment the floor was washed do to remove any soiled solution before being buffed with a white buffing pad. Any trace of its previous condition was now gone and the floor was uniform in appearance, it took much of the day to do the polishing and a set of four burnishing pads to acquire the right lustre. Source: Mabrle

Read more…

Read more

Resolving Marble Tile Installation Issues

These photos are from a newly installed Polished Marble floor in the kitchen at a residence in Irthlingborough Northants which had been left covered in grout haze. The customer called the builder back as they were unhappy with the finish but he could not rectify the problem, so the customer contacted Tile Doctor to see if anything could be done. This is a problem we often come up against where a builder or tiler does a good job of laying the tiles but for some reason doesn’t remove all the grout from the tile and we have even seen some jobs where the grout smears have been sealed over which makes it even more noticeable especially on a polished floor. Fortunately for the customer we are able to resolve such problems and after agreeing the process we set about solving the problem. Burnishing Polished Marble Tiles To protect the kitchen units from any splashing etc. all the kick boards were removed and plastic sheeting fitted to protect new doors and panels before any work was undertaken. Polished Marble is a very hard surface that has to be burnished with diamond encrusted pads to restore the finish so we set about this task using a set of Tile Doctor Burnishing Pads. The pads come in a set of four, you start with the coarse pad together with a little water and this cut’s

Read more…

Read more