tile maintenance – Tiling Tips – Tips and Information About Tiling

Marble Tile Restoration at a Neoclassical Palladian Mansion

25th March 2017 Reese Mackie 0 Comments cleaning services, cleaning tiles, floor restoration, Glasgow, grout cleaner, Kinross house, marble tiles, pantry, Sealing, Tile Cleaning, tile maintenance

This Marble tiled floor is located in the pantry of the historical Kinross House which is a late 17th-century country house overlooking Loch Leven that was built by the architect Sir William Bruce as his own home in 1686. You can see from the photograph the floor was in quite a state and given the history it was an honour to be asked to work on the floor. Marble Tile Cleaning and Polishing We brushed out the floor to remove all the loose debris and then proceeded to restore the floor using a set of diamond encrusted burnishing pads which fit a rotary buffing machine. The burnishing process is designed to grind out dirt in the stone and smooth /polish the floor, you start with a course pad and work your way through the four pad set until you get to the finer polishing pad. This may sounds simple but it does take time to complete. Sealing Marble Tiles Once the floor was polished we applied a couple of coats of Tile Doctor Pro-Seal which is a non-sheen premium sealer recommended for natural stone that provided the natural matte look the client was after and will protect the Marble and keep the floor looking good. Source: Marble restoration in Perth and Kinross, Scotland

Marble Posts

Marble Tiled Kitchen Floor Cleaning

21st March 2017 Reese Mackie 0 Comments cleaning grout, cleaning tiles, Didsbury, floor polish, kitchen, kitchen floor, marble specialist, marble tiled floor, marble tiles, tile clean, Tile Cleaning, tile maintenance

These Marble Floor tiles were installed in the kitchen of a house in Didsbury where a lot of building work had recently completed. You can see from the photograph that the tiles were stained and the grout had darkened. Marble Tiled Floor Polishing To improve the look of Marble it’s necessary to strip it right back and then polish which we are able to do with a rotary machine and burnishing pads. The pads come in a set of four; you start with the coarse pad together with a little water and this cuts through and removes surface grime and any surface seal. You then progress through the other finer pads one by one until you get to the final polishing pad which provides a high polish. Once this was done I got to work on the grout with a dilution of Tile Doctor Pro-Clean which was worked into the grout lines by hand using a stiff grout brush. The tile and grout was then rinsed down three times with clean water to remove any dirt. To give the floor the final finish Tile Doctor Shine powder was applied using a white buffing pad and a little water; the crystallising powder adds an extra level of shine to the Marble floor giving it that extra wow factor together and also gives it a tough durable finish. I can recommend this last step and certainly the customer was very pleased with

Marble Posts

Repolishing Marble tiles in a Hallway in Marlborough

15th March 2017 Reese Mackie 0 Comments cleaning shower room, limescale removal, marble shower room, marble tiles, marlborough, sealing tile, Tile Cleaning, tile maintenance, wall tile cleaning, wiltshire

This was an unusual problem; a customer contacted us regarding their Marble shower room at a house in Marlborough where the customer had sprayed Viakal Limescale remover onto the Marble tiles to clean them which unfortunately etched the surface. I’ve downloaded the MSDS sheet from the Inernet for this product and can verify it contains a combination of Etidronic, Formic and Phosphoric acids so not a very safe product to use on Marble or any sealed stone surface. Cleaning Marble Wall Tiles To remove the etching the Marble tiles were burnished using a 6inch coarse diamond encrusted burnishing pad fixed to a hand held rotary machine and lubricated with a spray bottle of water to help keep tiles wet. Burnishing pads come in a set of four from Coarse, Medium, Fine and Super Fine so once we had removed the etching using the coarse pad we then applied the next pads in turn which re-polish the area back to its original shine. Between pads we rinsed the tiles down to remove any soiled water away; after the final super fine pad was applied the shower tiles were given a thorough rinse down ready for sealing. Sealing the Marble Wall Tiles The wall was wiped down and left to dry overnight and we returned the next day to seal the Marble tiles using two coats of Tile Doctor Colour Grow

Marble Posts

Dull Marble Tiles Re-polished

14th March 2017 Reese Mackie 0 Comments cleaning services, cleaning tiles, Edinburgh, floor polishing, floor restoration, hallway floor cleaning, kitchen cleaning, marble tiles, tile maintenance, tiled floor

Details below of a Marble Tiled floor installed in the hallway and kitchen of a house in Edinburgh. The tiles were in good physical shape but had lost their polished appearance over time resulting in a dull un-appealing finish. This is not unusual for polished stone especially in high traffic areas such as hallways and kitchens. Cleaning Marble Floor Tile and Grout Our first job was to give the floor a general clean to remove grime and dirt especially along the grout lines. This was done by applying a strong dilution of Tile Doctor Pro-Clean which is left to dwell on the floor before being scrubbed in, Pro-Clean is an alkaline cleaner so it’s safe to use on tile and stone unlike acidic cleaners which can damage the surface of the stone over time. The now dirty cleaning solution was removed using a wet vacuum and the floor given a rinse using water. Marble Tiled Floor Polishing The next step was to burnish the Marble which is a process that removes ingrained dirt and brings up the polish on the tile. The process involves the application of four diamond pads in sequence; you start with the coarse pad together with a little water and this cuts through and removes surface grime and any surface seal. You then progress through the other finer pads one by one until you get to the

Marble Posts

Marble Tiled Floor Cleaned and Sealed

13th March 2017 Reese Mackie 0 Comments cleaning marble tiles, cleaning services, floor restoration, Hampshire, marble floors, marble tiles, Petersfield, sealing marble tiles, Tile Cleaning, tile maintenance, tiled floor

This polished Marble tiled floor was installed in a house in the old market town of Petersfield. The tile and grout was in good condition but like all polished stone floors they will go dull after a period of time and require burnishing and polishing to restore shine. Cleaning Marble Floor Tiles We gave the floor a quick sweep and wash down with a dilution of Tile Doctor Pro-Clean partly to ensure any surface grit etc. was removed but also so we could get a stiff grout brush in along the grout lines and give them a clean. Once done the floor was rinsed down with water which was removed with a wet vacuum, once done we moved straight onto burnishing the floor to restore the polish. Burnishing requires the application of a little water so there was no need to wait for it to dry. Burnishing requires the application of four different diamond encrusted graded pads in sequence working from coarse which removed old sealers and dirt through to medium, fine and super fine pads which build up the polish on the floor. The floor requires a rinse in-between each pad to remove any slurry and water is extracted from the floor using the wet vacuum, after the super fine pad we removed as much water from the floor as possible and left it to dry overnight ready for sealing the next day.

Marble Posts

Cleaning and Sealing Marble Hallway Tiles

11th March 2017 Reese Mackie 0 Comments cleaning services, floor restoration, hallway cleaning, marble tiles, noche marble tile, northamptonshire, Oundle, sealing marble tiles, Tile Cleaning, tile maintenance, tiled floor

These Noche Marble tiles installed in the hallway of this house in Oundle are a premium product with a warm antique look however like any natural stone tile it needs to be sealed in order to prevent dirt becoming ingrained in the pores of the stone. In this case the sealer had worn off and was the floor was now difficult to keep clean so we were called into the deep clean the tile and grout and then re-seal. Sealers can last a few years depending on wear. Cleaning Noche Marble Tiles To deep clean the tile and grout and remove any remaining sealer I combined a strong dilution of Tile Doctor Pro-Clean 50/50 with NanoTech UltraClean. The UltraClean adds tiny abrasive particles which make a more effective cleaning product, both products are safe to use on natural stone floors. It’s best to let the solution soak into the tile for ten to twenty minutes before being scrubbed in with a rotary machine fitted with a scrubbing brush or black scrubbing pad. The rotary pads can struggle to get into the grout lines so it’s best to use a stiff brush along those. To remove the soiled cleaning solution and rinse the tiles I use a high pressure spinner tool which is a brilliant machine for tile cleaning as it deploys water under high pressure water whilst extracting the dirty water back to a

Marble Posts

Removating old Marble Flagstones in West-Sussex

10th March 2017 Reese Mackie 0 Comments cleaning services, damaged marble tiles, marble tiles en-suite, shower cubicle, Tile Cleaning, tile maintenance, tile restoration, tiled shower room, west sussex, Woodmancote

Apologies in advance but I’m going to start this post with a warning; there are some very strong cleaning products available in supermarkets and most of which are completely unsuitable for use on natural stone floors because they contain acid. Even weak acids used over time will erode and reduce the life of a sealer and can lead to small holes appearing in your tiles so you do need to be careful what you apply and always read the label. The reason I mention this is I recently had a client in the village of Woodmancote with a Marble Tiled En-Suite who had sent over some photographs showing how the tiles had become marked after using Cilit Bang to clean them. Cilit Bang is a very strong product and has a great reputation for tackling tricky cleaning problems however it contains Benzenesulfonic Acid so it should not to be used on Stone. If you check the literature it does not say it can be used on stone although it does mention the product can be used on tiles and I suspect this is where the confusion comes from as I suspect it should say ceramic tiles. Getting back to the story I informed the client that it was tricky to tell from the photographs what would be required so I offered to pop round when next in the area and take a look. We offer a free no obligation home-survey

Marble Posts

Repairing Damaged Marble Shower Tiles

9th March 2017 Reese Mackie 0 Comments cleaning services, damage marble tiles, east sussex, restoring marble tiles, ringmer, shower room cleaning, Tile Cleaning, tile maintenance, tile restoration, tiled shower room

We were recently received a referral from a well-known house cleaning company who needed some assistance to resolve an issue with a Marble Tiled Shower at a Georgian property in Ringmer. Unfortunately one of their staff had sprayed a Cillit Bang cleaning fluid onto the tiles to remove Limescale deposits and had marked the tiles with white streaks which could not be removed. Now Cilit Bang is a very strong product and although it has a reputation for tackling tricky cleaning problems it contains Benzenesulfonic Acid which like any acid should not be used on Stone as it will damage it. If you check the internet you will find this problem is not uncommon and numerous people have experienced the same issue, the good news is there is a solution. Polishing Damaged Marble Shower Tiles Using a spray bottle containing a dilution of Tile Doctor Pro-Clean and a set of small Diamond encrusted burnishing pads attached to a handheld buffer I went to work on the tiles stripping away the existing sealer and bringing back the surface of the stone. During this process the damage to the tiles started to fade and once the sealer was removed the tiles took on a washed out appearance which was to be expected at this stage. Sealing Marble Shower Tiles After drying any wetness with a heat gun I left

Marble Posts

Restoring the Polish on Marble Tiles

7th March 2017 Reese Mackie 0 Comments black marble tiles, Brackley, cleaning services, floor restoration, maintaining marble floor, northamptonshire, polishing marble tile, Tile Cleaning, tile maintenance, tiled floor

This customer from the town of Brackley near Northampton got in touch with us to discuss their lovely black Marble tiled floor where it was proving difficult to maintain the shine. I went to visit and after carrying out some tests and asking a number of questions it became clear that that the product that had been used for regular cleaning had a high alkaline detergent content which was not suitable for the floor and had been causing smears, there were also light scratches due to the soiling levels. For polished stone or sealed floors we always recommend a neutral PH cleaning product such a Tile Doctor Neutral Cleaner. Burnishing Polished Black Marble Tiles To remove the light scratches and restore the shine on the Marble it was necessary to cut back the surface and re-polish with a set of burnishing pads. The pads come in a set of four and are applied in sequence starting with a coarse pad together with a little water to cut through the old sealer and grime. You then progress through the other finer pads one by one until you get to the final polishing pad which provides a high polish. After polishing the floor was rinsed down to remove any slurry from the polishing process and then allowed to dry before sealing with Tile Doctor Colour Grow which impregnates the pores in