bedfordshire – Tiling Tips – Tips and Information About Tiling

Marble Shower Tile Damaged during End of Tenancy Clean in Bedfordshire

1st September 2017 Reese Mackie 0 Comments bedfordshire, Cleaning company, End of Tenancy Clean, Limescale, marble tile cleaning, Marble Tile Polishing, Milton Keynes, Sharnbrook, Sharnbrook Tile Cleaning, Shower Stone Cleaning, Shower Tile Polishing, Shower Tiles, Tile Cleaning, tile polishing

I was contacted by the owner of a cleaning company in Milton Keynes, after an end of tenancy clean at a house in Sharnbrook went wrong. Unfortunately a member of their staff had incorrectly applied an acid based cleaning product to the Marble shower tiles which like most natural stone is acid sensitive. The cleaning product had etched the stone causing the damage you can see below. Being a reputable company they were determined to put the situation right and we were asked to step in. We have had a few issues of this type before where customers keen to remove unsightly Limescale marks from their stone tiles use a household cleaner without reading the bottle label first to see if it’s safe to use. Issues of this nature on Marble cannot be easily resolved with chemical products; it takes specialist knowledge and equipment. The quote was given and accepted and the work was booked in with the letting company for a few weeks later. Cleaning and Polishing a Marble Shower Cubicle The first photos show the extent of the damage which had not only damaged the immediate area but as the cleaning product was in liquid form it had ran down the wall had totally ruined the surface of the tiles in the lower half of the shower. The first thing I did was to protect the shower tray with towels

Scratched Marble Floor Tiles Restored

18th March 2017 Reese Mackie 0 Comments bedfordshire, cleaning services, floor polishing, floor restoration, kitchen, marble floor, marble tile, olney, Tile Cleaning, tiled floor

This was a Marble tiled floor installed in the kitchen of a house in Olney, Bedfordshire which had been scratched in places and was now overdue for some TLC. Cleaning Marble Tile and Grout The first job was to give the floor a general clean using a dilution of Tile Doctor Pro-Clean which was left to dwell on the Tile and Grout for a short while before being worked in with a rotary machine fitted with a scrubbing pad and a stiff hand brushes along the grout lines. The floor was then washed down with clean water to remove the soiled cleaning solution with the liquids being removed using a wet vacuum. Burnishing and Polishing Marble Tile To restore the original finish and remove the scratches the floor needed to be cut back using a set of diamond encrusted burnishing pads. The pads come in a set of four and you start with the coarse pad and a little water and then move on to the Medium, Fine and Very fine pads at which point the surface looks immaculate and polished. The next task was to protect the floor and bring up the appearance even further by applying Tile Doctor Shine Powder which is polished into the floor using a buffing pad; the powder add a really deep finish to the appearance of the Marble and hardens on the surface to provide durable surface protection. Hopefully