Beautiful Marble Tiled Floor Polished in Willington Cheshire

Although expensive Marble is a highly coveted, popular and classic flooring choice, not only is it hard wearing you can attain a high polish that simply looks fantastic. At peak condition, it’s one of the most beautiful and eye-catching types of stone available, however it’s appearance will degrade over time and with use, so it does need maintaining. This customer, who lives in the small village of Willington in Cheshire had contacted us because they were concerned that the lustre on their Marble tiled floor which had been installed throughout much of the ground floor had faded and lost its attractive appearance. We arranged a date to go over and re-polish the floor back to health. Burnishing and Cleaning a Marble Tiled Floor On arrival the first step was to give the floor a general clean using a mild dilution of Tile Doctor Pro-Clean which is an alkaline tile cleaning product that is safe to use on Marble. I mention this because there are many cleaning products on the market today which are acidic and really only meant for use on Vinyl and Ceramic tiles. The cleaning solution was applied by sponge mop and left to soak for ten to twenty minutes with a particular focus on the grout lines. I used a stiff brush along the grout lines to get them really clean and then once done

Read more…

Read more

Cleaning and Polishing Marble Tiles

These photographs were taken at a house in Ealing, West London where the customer had requested a deep clean and polish of the marble tiled floors installed in a kitchen and conservatory which had become dull and dirty over a period of time. Marble Tiled Floor Polishing The first step was to give the Marble floor a thorough clean throughout with a medium dilution of Tile Doctor Pro-Clean which is an industrial strength Tile Cleaner safe to use on natural stone floors, we also took this opportunity to use a stiff brush along the grout lines to get them nice and clean, the soiled cleaning solution was removed using a wet vacuum and the floor rinsed with clean water. The next step was to use a set of diamond encrusted Twister Burnishing Pads fitted to a rotary buffing machine to polish the floor. The pads come in a set of four; you start with the Red pad together with plain water and this cuts through and removes surface grime and any surface seal. You then progress through one by one until you get to the final Green polishing pad which provides a high polish, we managed to complete most of this process before the end of day. Polishing and Sealing Marble Tile The next day we completed the polishing process with the Green pad which really brought a deep shine to the floor. To

Read more…

Read more

Multiple Marble Wall And Floor Tiles Cleaned

This job was to refresh the Marble tile installed in a house in Woking. There were a number of different marble tiles installed on the wall and floor including two shower cubicles, a bathroom floor, a small cloakroom floor and the kitchen floor; the pictures below show before and after photographs for each job. Cleaning a Marble Tile Shower Cubicle I started with the shower cubicles using Tile Doctor Oxy-Pro which is a specific product for cleaning showers and comes with a spray attachment that mixes the cleaning agent with air making it lighter and helping it stick to vertical surfaces. This was left to dwell on the surface for a while and then the tiles were scrubbed before being rinsed down. This action not only cleaned the dirt and soap scum off the tile it also got rid of some mould that had started to grow. In one shower there was a build-up of limescale on the wall so to get rid of this I used a little Tile Doctor Grout Clean-up, this product is usually for removing grout smears from tile however it’s also good at removing most types of mineral deposits such as Limescale, you do have to be quick though as it’s an Acid based product I had to be quick and to thoroughly rinse because I didn’t want to damage the marble. Marble Mosaic Bathroom floor tile cleaning The next

Read more…

Read more

Dealing with Scratched Marble Floor Tiles

This Marble Tiled floor was installed in the conservatory of a house in Woodhall Spa who had asked if we could remove the scratches from their inherited marble tiles around the door area and where furniture had been dragged across the tile as shown in the photos. Interestingly our customer is a chief engineer on cruise ships all over the world and knew what this floor could look like if restored professionally. Burnishing Mable Tiles Other than the scratches the majority of the floor had been well maintained so the solution was to burnishing the marble back to its original condition using a set of diamond encrusted pads fitted to a slow speed machine and lubricated with a little water. The burnishing pads come in a set of four and applied to the floor with a little water one by one using a rotary machine running at slow speed. The process starts with the coarse pad which strips back the top layer and removes sealers and dirt from the surface of the stone. The pads then become finer and finer with the last pad being a final polish that takes the tile back to near it’s originally intended shine. You can see from the photographs that we actually managed to resurface the marble, remove the scratches and we also filled in some small holes and then allowed the floor to dry

Read more…

Read more

Marble Tiled Kitchen Floor Cleaning

These Marble Floor tiles were installed in the kitchen of a house in Didsbury where a lot of building work had recently completed. You can see from the photograph that the tiles were stained and the grout had darkened. Marble Tiled Floor Polishing To improve the look of Marble it’s necessary to strip it right back and then polish which we are able to do with a rotary machine and burnishing pads. The pads come in a set of four; you start with the coarse pad together with a little water and this cuts through and removes surface grime and any surface seal. You then progress through the other finer pads one by one until you get to the final polishing pad which provides a high polish. Once this was done I got to work on the grout with a dilution of Tile Doctor Pro-Clean which was worked into the grout lines by hand using a stiff grout brush. The tile and grout was then rinsed down three times with clean water to remove any dirt. To give the floor the final finish Tile Doctor Shine powder was applied using a white buffing pad and a little water; the crystallising powder adds an extra level of shine to the Marble floor giving it that extra wow factor together and also gives it a tough durable finish. I can recommend this last step and certainly the customer was very pleased with

Read more…

Read more

Scratched Marble Floor Tiles Restored

This was a Marble tiled floor installed in the kitchen of a house in Olney, Bedfordshire which had been scratched in places and was now overdue for some TLC. Cleaning Marble Tile and Grout The first job was to give the floor a general clean using a dilution of Tile Doctor Pro-Clean which was left to dwell on the Tile and Grout for a short while before being worked in with a rotary machine fitted with a scrubbing pad and a stiff hand brushes along the grout lines. The floor was then washed down with clean water to remove the soiled cleaning solution with the liquids being removed using a wet vacuum. Burnishing and Polishing Marble Tile To restore the original finish and remove the scratches the floor needed to be cut back using a set of diamond encrusted burnishing pads. The pads come in a set of four and you start with the coarse pad and a little water and then move on to the Medium, Fine and Very fine pads at which point the surface looks immaculate and polished. The next task was to protect the floor and bring up the appearance even further by applying Tile Doctor Shine Powder which is polished into the floor using a buffing pad; the powder add a really deep finish to the appearance of the Marble and hardens on the surface to provide durable surface protection. Hopefully

Read more…

Read more

Refreshing a Marble Tiled Kitchen

This Polished Marble floor had been installed in the kitchen of a house near Leicester, it had been some time since its last deep clean and re-polish so the tiles had started to look dull and lifeless. Stripping the Marble Tiled Floor To resolve the floor was cleaned using a dilution of Tile Doctor Remove and Go worked in using a scrubbing pad to remove any remaining sealer and dirt especially along the grout lines. Once this was done the floor was burnished using a set of Tile Doctor burnishing pads which strip the Marble back and then re-builds the polish. These diamond encrusted pads come in a number of different grades and each one does a different job from scrubbing to polishing. I started with the coarse pad together with a little water and this does the job of stripping back the surface of the floor. I then moved onto the finer grades which do the job of building the surface polish to a nice shine. Sealing the Marble Floor The next morning I arrived to find the floor had dried out enough for me to seal it which was done using a couple of coats of Tile Doctor Ultra Seal which is an impregnating sealer that provides a natural look and is recommended for use in food preparation area. Once it was finished the floor took on a new lease of life and the deep shine has been

Read more…

Read more

Maintaining a Marble Kitchen Worktop

This beautiful Marble kitchen worktop has been installed in a house in the village of Prestbury some years earlier and was now looking rather dull and spoiled by wine glass marks. The polish can be restored on these worktops in a similar way to that of a Marble floor the only difference being you have to use smaller more manageable burnishing pads. Polishing a Marble Table Top After protecting the floor with sheets I proceeded to re-polish the Marble worktop with a set of six inch burnishing pads fitted to a hand held machine. Similar to floor burnishing you start with a coarse pad to remove scratches and ingrained dirt lubricated with a little water and then move onto the polishing pads from Medium, Fine through to Super Fine. You need to wash down the Marble in-between each pad as the water does become soiled from the burnishing process. For the regular maintenance of Marble and Granite worktops we recommend the use of Tile Doctor Stone Patina spray which helps build up lustre on the stone as well as cleaning it. Source: Professional Tile, Stone and Grout maintenance service in North Cheshire

Read more…

Read more

Polishing Marble Wall and Floor Tiles in Shropshire

For this job I travelled to the town of Albrighton, which is actually the most easterly settlement in the whole of Shropshire. My client had an issue with their Marble tiled floor which was installed in the kitchen and hallway. They had dropped and broke a bottle of vinegar in the kitchen, and the substance unfortunately came in contact with the tiles. Since Marble is highly sensitive to acid, the vinegar (an acetic acid) had basically etched the surface of the tiles make it impossible clean chemically. Although the tiles were a nice, expensive Marble, the person who had first installed them had done a poor job, leaving lippage of up to 5mm in some areas, which would make work trickier. Undeterred I could see it would be possible to restore the floor using a combination of burnishing for the tiles and cleaning with a high alkaline product for the grout lines. I demonstrated this to my client on one tile which went well and I was then given the go ahead to restore the entire floor. Cleaning and burnishing acid damaged Marble tiles My first task focused on cleaning the grout lines using a solution of Tile Doctor Pro-Clean worked in with a stiff grout brush. Pro-Clean is a high alkaline cleaner suitable for use on most types of natural stone floor. It helped to alleviate most of

Read more…

Read more

Maintaining Marble Tiled Floors

The photographs before are of Marble floor installed in the kitchen of a house in Melton Mowbray, that we recently refinished. The honed matte marble tiles had previously been finished with a water-based topical floor sealer by the customer to create a polished finish; unfortunately the coating had become damaged, worn and now soiled. To restore the finish with something more durable we recommended the removal of any remaining coatings, then re-finishing with our restorative diamond encrusted burnishing pad system and then re-sealing with an impregnating rather than topical sealer. Our quote was accepted and we returned on the agreed date to restore the floor. Deep Cleaning Marble Tile and Grout The first step was to remove the old coating and clean the grout using a strong dilution of Tile Doctor Pro-Clean which is a strong alkaline formula that is safe to use on stone. The solution was scrubbed into the grout using a stiff brush and also worked into the Marble floor using a rotary machine fitted with a black scrubbing pad. The now dirty cleaning solution was then rinsed away using water and extracted with a wet vacuum. Burnishing a Marble Tiled Floor The next step was to burnish the floor using a set of Tile Doctor burnishing pads starting with a coarse pad to strip the

Read more…

Read more

Deep Cleaning and Polishing a Marble Tiled Kitchen Floor

When you have high quality tiles like Marble, Limestone and Travertine, it’s even more important than normal to use suitable cleaning products. If, for example, you apply a slightly acidic cleaner to Limestone, it can cause severe, irreparable etching that significantly damages the appearance of the stone. In a similar way, this customer in Penrith had been using an unsuitable wax-based liquid soap to clean her “Crema Marfil” Spanish Marble kitchen tiles. It had failed to prevent a heavy buildup of dirt, and had in fact darkened the stone, leaving it looking stained, unnatural, and all-around difficult to clean. To avoid the floor becoming a complete nuisance, the customer contacted me to see what could be done to alleviate the problems. Burnishing a Dirty Marble Tiled Kitchen Floor I explained to the customer that a process we use at Tile Doctor known as burnishing would be the most effective way to clean the Marble. Also suitable for Limestone and Travertine, this process involves the sequential application of specialist diamond encrusted pads of different grits to grind down any soil buildup and gradually create an aesthetic polish in the surface of the tiles. Our system consists of four burnishing pads: Coarse, Medium, Fine and Very Fine. I started, using a little water

Read more…

Read more

Renovating White Tumbled Marble Tiles

This White Tumbled Marble tiled floor at a house in Hampton had been installed throughout the kitchen and dining area ten years back and was now in desperate need of a deep clean and seal to remove dirt that had accumulated in the pores of the stone. Once the dirt gets into the pores it makes it difficult to keep clean which is exactly the problem the property owner had experienced. The ‘tumbled’ effect on the Marble is achieved by tumbling the tiles in drums to soften and age the edges and surface of the stone. However, it was difficult to appreciate this interesting style as the presence of dirt and staining was quite overwhelming and the owner was now keen to restore it back to its original condition. Cleaning Tumbled Marble Tiles I started the restoration by applying a strong dilution of Tile Doctor Pro-Clean. This high alkaline cleaning product was spread across the floor and left to dwell for a short period, before I then worked it deep into the pores of the stone using a heavy duty rotary scrubbing machine. Next, some of the stubborn, more deeply ingrained stains were scrubbed by hand, along with the grout lines, which were also particularly dirty. The resulting slurry of water and cleaning solution was then pressure rinsed away and soaked up with a wet vacuum. The

Read more…

Read more