cleaning tiles – Tiling Tips – Tips and Information About Tiling

Marble Tile Restoration at a Neoclassical Palladian Mansion

25th March 2017 Reese Mackie 0 Comments cleaning services, cleaning tiles, floor restoration, Glasgow, grout cleaner, Kinross house, marble tiles, pantry, Sealing, Tile Cleaning, tile maintenance

This Marble tiled floor is located in the pantry of the historical Kinross House which is a late 17th-century country house overlooking Loch Leven that was built by the architect Sir William Bruce as his own home in 1686. You can see from the photograph the floor was in quite a state and given the history it was an honour to be asked to work on the floor. Marble Tile Cleaning and Polishing We brushed out the floor to remove all the loose debris and then proceeded to restore the floor using a set of diamond encrusted burnishing pads which fit a rotary buffing machine. The burnishing process is designed to grind out dirt in the stone and smooth /polish the floor, you start with a course pad and work your way through the four pad set until you get to the finer polishing pad. This may sounds simple but it does take time to complete. Sealing Marble Tiles Once the floor was polished we applied a couple of coats of Tile Doctor Pro-Seal which is a non-sheen premium sealer recommended for natural stone that provided the natural matte look the client was after and will protect the Marble and keep the floor looking good. Source: Marble restoration in Perth and Kinross, Scotland

Marble Tiled Kitchen Floor Cleaning

21st March 2017 Reese Mackie 0 Comments cleaning grout, cleaning tiles, Didsbury, floor polish, kitchen, kitchen floor, marble specialist, marble tiled floor, marble tiles, tile clean, Tile Cleaning, tile maintenance

These Marble Floor tiles were installed in the kitchen of a house in Didsbury where a lot of building work had recently completed. You can see from the photograph that the tiles were stained and the grout had darkened. Marble Tiled Floor Polishing To improve the look of Marble it’s necessary to strip it right back and then polish which we are able to do with a rotary machine and burnishing pads. The pads come in a set of four; you start with the coarse pad together with a little water and this cuts through and removes surface grime and any surface seal. You then progress through the other finer pads one by one until you get to the final polishing pad which provides a high polish. Once this was done I got to work on the grout with a dilution of Tile Doctor Pro-Clean which was worked into the grout lines by hand using a stiff grout brush. The tile and grout was then rinsed down three times with clean water to remove any dirt. To give the floor the final finish Tile Doctor Shine powder was applied using a white buffing pad and a little water; the crystallising powder adds an extra level of shine to the Marble floor giving it that extra wow factor together and also gives it a tough durable finish. I can recommend this last step and certainly the customer was very pleased with

Dull Marble Tiles Re-polished

14th March 2017 Reese Mackie 0 Comments cleaning services, cleaning tiles, Edinburgh, floor polishing, floor restoration, hallway floor cleaning, kitchen cleaning, marble tiles, tile maintenance, tiled floor

Details below of a Marble Tiled floor installed in the hallway and kitchen of a house in Edinburgh. The tiles were in good physical shape but had lost their polished appearance over time resulting in a dull un-appealing finish. This is not unusual for polished stone especially in high traffic areas such as hallways and kitchens. Cleaning Marble Floor Tile and Grout Our first job was to give the floor a general clean to remove grime and dirt especially along the grout lines. This was done by applying a strong dilution of Tile Doctor Pro-Clean which is left to dwell on the floor before being scrubbed in, Pro-Clean is an alkaline cleaner so it’s safe to use on tile and stone unlike acidic cleaners which can damage the surface of the stone over time. The now dirty cleaning solution was removed using a wet vacuum and the floor given a rinse using water. Marble Tiled Floor Polishing The next step was to burnish the Marble which is a process that removes ingrained dirt and brings up the polish on the tile. The process involves the application of four diamond pads in sequence; you start with the coarse pad together with a little water and this cuts through and removes surface grime and any surface seal. You then progress through the other finer pads one by one until you get to the