Stone – Tiling Tips – Tips and Information About Tiling

Polishing Marble Counter Tops in an Opulent Bowden Bathroom

18th June 2018 Reese Mackie 0 Comments Bowden, Cleaning, countertops, etching, Greater Manchester, Marble Bath Surround, marble cleaning, marble polishing, Polishing, Sealing Marble, Stone, stone worktops

Although most of the work we do involves floor cleaning you should know we also cover stone worktops in Kitchens and countertops in bathrooms. An example being this opulent bathroom with Marble countertops that surrounded the sink and bath. The bathroom was installed at a house in the up-market area of Bowden which together with the villages of Hale and Hale Barns are regarded as being the wealthiest parts of Greater Manchester. The customer had got in touch to ask if we could restore the appearance of the Marble surrounds which had become dirty and etched through general use. Restoring the Appearance of Marble Countertops My first job was to protect the wood panelling and lush red carpet that surrounds the bath, once all was protected we started to use a set of tile doctor six-inch burnishing pads to clean the Marble and restore the polish. The Burnishing pads come in a set of four and are applied to the stone with a little water in sequence from the coarse 400 grit pad which removes etching and then through the medium 800-grit, fine 1500-grit and finally the very fine 3000-grit pad which restore shine to the Marble. I use a hand-held buffing machine to do this and carefully rinse in-between each pad to remove the small amount of slurry which is generated. The last

Beautiful Marble Tiled Floor Polished in Willington Cheshire

25th January 2018 Reese Mackie 0 Comments Buffing, Burnishing, Cheshire, Cleaning, Floor Tiles, grout cleaning, kitchen, Living room, Marble, Polishing, Sealing, Stone, Tile, Village, Willington

Although expensive Marble is a highly coveted, popular and classic flooring choice, not only is it hard wearing you can attain a high polish that simply looks fantastic. At peak condition, it’s one of the most beautiful and eye-catching types of stone available, however it’s appearance will degrade over time and with use, so it does need maintaining. This customer, who lives in the small village of Willington in Cheshire had contacted us because they were concerned that the lustre on their Marble tiled floor which had been installed throughout much of the ground floor had faded and lost its attractive appearance. We arranged a date to go over and re-polish the floor back to health. Burnishing and Cleaning a Marble Tiled Floor On arrival the first step was to give the floor a general clean using a mild dilution of Tile Doctor Pro-Clean which is an alkaline tile cleaning product that is safe to use on Marble. I mention this because there are many cleaning products on the market today which are acidic and really only meant for use on Vinyl and Ceramic tiles. The cleaning solution was applied by sponge mop and left to soak for ten to twenty minutes with a particular focus on the grout lines. I used a stiff brush along the grout lines to get them really clean and then once done