Repolishing Marble tiles in a Hallway
The owner of this polished Marble Tiled hallway at a house in Trowbridge was unhappy with the look of their floor which had become dull and scratched and wanted the floor re-polishing. Apologies in advance for the pictures below on reflection I should have taken some close-up shots so you could see the problem better. Cleaning Marble Tile and Grout The first step first was to give the floor a general clean focusing on the grout lines so I started by mixing a mild dilution of Tile Doctor Pro-Clean which is an alkaline based product that is safe to use on Marble. The solution was brushed around the floor concentrating on getting the product into the grout lines. I left this to dwell for 5-10 minutes before scrubbing with stiff grout brush. Once the grout lines were cleaned the dirty solution was removed with a wet vacuum and the tiles rinsed thoroughly with clean water. Polishing Marble Tiles The next step was to burnish the floor using a coarse diamond encrusted pad fitted to a rotary machine. This is used with clean water to remove surface scratches and any sealer that may be present. Once the water has turned to slurry after 4 passes of each tile I would remove with a wet vacuum and rinsed thoroughly. One that step was completed the process is repeated using the Medium,
Read more