Maintaining the Polish on Limestone Floor Tiles


These Limestone tiles had been laid in a modern property in Witham, an Essex town that sits between Chelmsford and Colchester. The property owners had spent many hours over the years cleaning and sealing the floor to maintain its condition, but while the tiles were in certainly in good shape, they had lost their shine and lustre. The result was quite a dull looking floor that could certainly be improved on.

When the property owners contacted me about the problem, I informed them that due to the hardness of the stone only a process known as burnishing, which involves cleaning and polishing with special gritted pads instead of a liquid product, would do the trick to restore the Limestone tiles.

Burnishing a Limestone Tiled Floor

We use burnishing to restore several types polished stone to looking their best, including Limestone, Marble, and Travertine. Tile Doctor’s burnishing system consists of four diamond encrusted twister pads with varying levels of grit. The pads are graded so that each hones the stone to a greater degree than the previous one, resulting in the build-up of a durable polish and shine on the stone.

Using a small amount of water as lubrication, I worked my way through the system, applying each pad in succession, beginning with the Coarse grit pad, before on to Medium, Fine and Very Fine pads. While polishing the tiles, the diamond encrusted pads also serves to break down any dirt. Thankfully, these tiles were already well taken care off and were not currently suffering from heavy soil build up.

After completing the burnishing process, I promptly rinsed away any cleaning slurry and left the floor to dry.

Limestone tiles before cleaning Witham Limestone tiles after cleaning Witham

Sealing a Limestone Tiled Floor

I returned the property once the floor had dried completely to seal the tiles, with my choice of sealer being Tile Doctor Colour Grow. I applied three coats of the sealer to the tiles, before buffing them for a final time.

Colour Grow is an ideal sealer for Limestone for two main reasons. Firstly, it is an impregnating sealer, meaning it penetrates deep into the pores of the Limestone to provide robust protection against ingrained dirt. Secondly, it contains colour intensifying properties which enhance the natural colours in the Limestone.

I took a couple of photographs before and after (above) in which you can see a significant improvement in the shine and lustre of the Limestone tiles. Most of the cream and tan shades in the Limestone were practically invisible before the burnishing was carried out and a fresh seal was applied – now the tiles stand out as the most prominent feature of the room. Needless to say, the customer was very satisfied.
 
 
Source: Limestone Tile and Stone Cleaning and Sealing Service in North Essex



Source link